The Turbo Flame™ Torch is very versatile. It can be used with all fuel gases and is very safe to operate. The torch design prevents flashbacks even when piercing heavy, thick materials.
- Only the cutting nozzles are changed when going from one material size to another.
- Throttle valves controlling the flow of gas and oxygen can be replaced individually.
- Oxygen consumption is lower, which reduces the cost of utilities. This is achieved without any loss of cut quality or cutting speed.
- The arrangement of the nozzle holes and preheat slots make cleaning easy with Messer Cutting Systems nozzle cleaners.
- Each nozzle is individually tested.
- Only four sizes of nozzles are required to cut material from 1/4 to 3 inches thick (6.35 to 7.62 mm), compared to eight nozzles for other suppliers. This reduces the cost of stocking many nozzle sizes.
Turbo flame™ System
- Torch including throttle valves and check valves.
- TurboFlame™ nozzles for all fuel gases.
- Supply hoses (NFPA rated).
- Regulation equipment.
- Torch holder mounts to all cutting machines.
Contact
Messer Cutting Systems (China) Ltd.
528 Nanbang Road
Kunshan 215300
Jiangsu Province
China